×
  1. Home  -  
  2. Products  -  
  3. Roll-Away Covers  -  
  4. Restricted Space / Internal Spring Motor

Restricted Space / Internal Spring Motor

Type AV32 / MF46 /MF 60 / MF80

Technical Details

EITEC Roll-Away Covers with internal spring motor are the inexpensive solution for the protection of machine tools when space is restricted and complete sealing is not necessary.

EITEC offers either the standard AV series with sealed bearings, or the flexible lightweight roll-away systems, specially developed for cover material, or steel roll-away systems to withstand stronger traction.

For reasons of safety and to protect against soiling an appropriate housing is recommended.

Type AV 32, MF 46 and MF 60

Thanks to the use of rollers on permanently lubricated ball bearings and the employment of special springs a high degree of safety of operation is guaranteed.

Benefits

  • Sealed bearings
  • Rollers on permanently lubricated ball bearings
  • For high process speeds, up to 90m/min
  • Suitable for alu apron covers

Applications

In addition to the standard horizontal or vertical uses, roll-away covers can also be mounted diagonally. For special requirements EITEC will design individual solutions in accordance with customers’ wishes.

Lightweight Roll-Away Covers

Technical Details

EITEC Roll-Away Covers with internal spring motor are the inexpensive solution for the protection of machine tools when space is restricted and complete sealing is not necessary.

EITEC offers either the standard AV series with sealed bearings, or the flexible lightweight roll-away systems, specially developed for cover material, or steel roll-away systems to withstand stronger traction.

For reasons of safety and to protect against soiling an appropriate housing is recommended.

Lightweight Roll-Away Covers

Very well suited for high running performance with low level of wear. Recommended for use chiefly on synthetic covers.

Benefits

  • Flexible, due to small size
  • Good value for money

Applications

In addition to the standard horizontal or vertical uses, roll-away covers can also be mounted diagonally. For special requirements EITEC will design individual solutions in accordance with customers’ wishes.

Steel Roll-Away Covers

Technical Details

EITEC Roll-Away Covers with internal spring motor are the inexpensive solution for the protection of machine tools when space is restricted and complete sealing is not necessary.

EITEC offers either the standard AV series with sealed bearings, or the flexible lightweight roll-away systems, specially developed for cover material, or steel roll-away systems to withstand stronger traction.

For reasons of safety and to protect against soiling an appropriate housing is recommended.

Steel Roll-Away Covers

Only available with normal steel material, as the outer cover serves also as a spring motor.

Benefits

  • For higher process speeds and greater mechanical stresses
  • Very good protection against contact with chips, oil and coolant emulsion
  • Spring steel, 0.2 to 0.4mm thick, resistant to corrosion and acid

Applications

In addition to the standard horizontal or vertical uses, roll-away covers can also be mounted diagonally. For special requirements EITEC will design individual solutions in accordance with customers’ wishes.