×
  1. Home  -  
  2. Products  -  
  3. Machine Protection Gates  -  
  4. Roof Covers  -  
  5. D-LS14-E

D-LS14-E

Roof cover for horizontal milling

Equipment

  • Alutec LS14 Aluminium Profile
  • Anodized aluminium precision profile
  • Spring motor
  • Slideway system
  • Housing
  • Safety edge
  • Transport device

Process

  • Crane loading/ robot loading
  • Milling process for various components

Technical data of the illustrated type

Mounting position Roof Covers
Extension length 2354 mm
Width 1848 mm
Type of cover Aluminium profile
Type of drive Motor
Spring motor
Max. opening speed 0.4 m/s
Max. closing speed 0.5 m/s
Min. reverse radius 45 mm
Apron weight 105 kg
Option EiCON control No
Application area Machine construction
Automation
Reference number Ref: 0029

Conditions

Impact test acc. DIN EN 12477 (test report), Effective sealing against oil, coolant and grease, Corrosion resistant, High mechanical strength, Finger protection, Smooth surface, Temperature resistant

Roof cover for vertical milling

Equipment

  • Alutec LS14 Aluminium Profile
  • Electrical drive
  • Additional rotary motor for tension maintenance of the apron
  • Slideway systems
  • Housing
  • Transport device

Process

  • Crane loading/ robot loading
  • Milling process for various components

Technical data of the illustrated type

Mounting position Roof Covers
Extension length 6000 mm
Width 3400 mm
Type of cover Aluminium profile
Type of drive Motor
Max. opening speed 0.2 m/s
Max. closing speed 0.2 m/s
Min. reverse radius 45 mm
Apron weight 510 kg
Option EiCON control No
Application area Machine construction
Logistics
Automation
Reference number Ref: 0010

Conditions

Impact test acc. DIN EN 12477 (test report), Effective sealing, Corrosion resistance, High mechanical strength, Smooth surface, Temperature resistant.

Process safety for a laser cutting machine

Equipment

  • Alutec 5.5 Aluminium Profile
  • Electrical drive/ spring motor
  • Chain drive
  • Slideway system with safety interlocks in the top, middle and lower position
  • Housing with winding shaft
  • Transport device
  • Safety edge
  • End position switch

Process

  • Open the roof cover
  • Removing the 3D printing parts
  • Close the roof cover

Technical data of the illustrated type

Mounting position Roof Covers
Extension length 2200 mm
Width 3700 mm
Type of cover Aluminium profile
Type of drive Motor
Spring motor
Max. opening speed 0.5 m/s
Max. closing speed 0.4 m/s
Min. reverse radius 45 mm
Apron weight 203 kg
Option EiCON control Yes
Application area Machine construction
Automation
Food production
Reference number Ref: 0009

Conditions
Heat resistance, cable routing, safety edge, degree of protection IP 54, 90 ° deflection, no edge in head height